| Customization: | Available |
|---|---|
| Technics: | Forging |
| Standard: | GB |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Anchor rod is a must-have accessory when installing a pole line for distribution or transmission.
More importantly, you must choose high quality, durable, and reliable anchor rod.
A reason why I want to walk you through the nitty-gritty of this accessory.
It is a short guide that covers all these basics - definition, designs, classification, specification, installation process, etc.
Guy wire anchor rod feature:
1. Breaking Load test: 62kn for 1 min
2. Hot-dip galvanized strictly according to ASTM-123
3. Uniform and reasonable packing
4. Size Accuracy 0.1mm.
5. Direct From Factory, Save 30%-50% Cost
The guy wire anchor rod with square nut is manufactured in hot-dip galvanized steel. The raw material steel is selected according to AISI-SAE 1018 or 1020. The carbon is not lower than 0.13% according to ASTM A36M. Zinc coating of 80 um, according to ASTM A-153. The head of the guy wire anchor rod will be forged in one single piece with a single eye, twin-eye, or trip eye as attached drawings.The other side rod is with 8cm to 10cm thread length according to UNC. The UNC required 10thread per inch.
The heavy-duty square nut which assembled on the guy wire anchor rod is of galvanized steel with a minimum coating of 53 um, according to class C of ASTM A153. The square nut thread is made before galvanization.
| Item | Length | Dia. | Minimum strength | Thread length | Yield strength |
| Single eye thimble rod | 8'or 6' | ¾" | 106kn | 89mm UNC | Minimum 345 Mpa |
| Twin eye thimble rod | 8'or 6' | ¾" | 106kn | 89mm UNC | Minimum 345 Mpa |
| Trip eye thimble rod | 8'or 6' | ¾" | 106kn | 89mm UNC | Minimum 345 Mpa |
){kind=link}